Interior Designer
Contact
0
Selected documents
Special High & Low Temperature Adhesive: CLIM'ADHESIVE
Description
- Suitable for use over normal underfloor heating installations
- Consistency: viscous liquid
- Coverage approx: 20m² with 5L
- Recommended tool: 5-6mm trowel
- Storage: Store between 5°C and 30°C. Protect from frost
- Shelf life: 24 months in unopened containers stored under good conditions
- Open time approx: 30 minutes
- High resistance to both heat and PVC plasticizers
- Suitable for use in conservatories and areas where floor to ceiling windows are installed
- Eliminates joint contraction / expansion
- Withstands extreme temperature variations (e.g. direct sun, drop in temperature)
- Sets in just 30 minutes
- Excellent grip
- Odourless: no solvents
Installation Guidelines: Dry absorbent subfloors of concrete, sand / cement screed, synthetic anhydrite, floor smoothing underlayments, plywood and hardboard. Non absorbent surfaces should be smoothed with the appropriate floor smoothing underlayment.
Floor Preparation: Substrate surfaces must be of sound construction, protected from rising damp, permanently dry and free of any contaminants that could affect adhesion. Moisture content of substrate must be less than 75% relative humidity.
Application: spread the adhesive uniformly over the subfloor. Once adhesive has reached a dry tack translucent film you will have approximately 6 hours working time. This is dependent on absorbency of the subfloor.
