Interior Designer
Contact
0
Selected documents
Fast Tack Adhesive: PERM'ADHESIVE
Description
- Suitable for use over normal underfloor heating installations
- Consistency: creamy
- Coverage approx: 25m² with 5L
- Recommended tool: 5-6mm trowel
- Storage: Store between 5°C and 30°C. Protect from frost
- Shelf life: 24 months in unopened containers stored under good conditions
- High bond strength
- Dry glue: For a clean, stain-free installation
- Allows repositioning as long as 6 hours after installation
- Designed to reduce trowel grooves
- Odourless: no solvents
- Excellent resistance to plasticizers migration. Non-staining
Installation Guidelines: dry absorbent subfloors of concrete, sand / cement screed, synthetic anhydrite, floor smoothing underlayments, flooring grade chipboard, plywood and hardboard.
Floor Preparation: substrate surfaces must be of sound construction, protected from rising damp, permanently dry and free of any contaminants that could affect adhesion. Moisture content of substrate must be less than 75% relative humidity or CM test less.
Application: spread the adhesive uniformly over the subfloor. Once adhesive has reached a dry tack translucent film you will have approximately 6 hours working time. This is dependent on absorbency of the subfloor.
